Our engineers designed the line of Hi-Tek differential covers to not only look good but address a number of weaknesses of the factory stamped steel covers. First, they started by constructing the covers of thick A356.0-T6 aluminum, which dissipates heat much faster than the factory steel unit keeping the fluid temperature lower under high-stress loads vs. a steel cover. Then for added durability, we added a reinforced center bar for extra strength along with load bolts to help prevent bearing cap deflection under severe loads. The internal shape of the cover retains the smooth round back internally to help keep the fluid flow going over the ring gear to properly lubricate and cool the bearings and ring & pinion gears. Additional features include a magnetic drain plug for catching ferrous metal particles, MIL-Spec (MIL-A-8625) black anodized finish, machined B&M logo, and all necessary hardware and easy to follow detailed instructions for a quick and simple installation you can do at home. Note: Gasket not included.

Features:
Our engineers designed the line of Hi-Tek differential covers to not only look good but address a number of weaknesses of the factory stamped steel covers. First, they started by constructing the covers of thick A356.0-T6 aluminum, which dissipates heat much faster than the factory steel unit keeping the fluid temperature lower under high-stress loads vs. a steel cover. Then for added durability, we added a reinforced center bar for extra strength along with load bolts to help prevent bearing cap deflection under severe loads. The internal shape of the cover retains the smooth round back internally to help keep the fluid flow going over the ring gear to properly lubricate and cool the bearings and ring & pinion gears. Additional features include a magnetic drain plug for catching ferrous metal particles, MIL-Spec (MIL-A-8625) black anodized finish, machined B&M logo, and all necessary hardware and easy to follow detailed instructions for a quick and simple installation you can do at home. Note: Gasket not included.

More From This Category

Strange ,Spool, Full Size, Steel, 40-Spline, 10-Bolt, Dana 60, Each

Strange ,Spool, Full Size, Steel, 40-Spline, 10-Bolt, Dana 60, Each

$729.11

WHITELINE Mount Bushing, Rear Differential, 75.5 mm OD, 32/17 mm ID, 30.5 mm Length, for NISSAN 2009-ON, Kit

WHITELINE Mount Bushing, Rear Differential, 75.5 mm OD, 32/17 mm ID, 30.5 mm Length, for NISSAN 2009-ON, Kit

$93.85

Motive Gear Ring and Pinion, 4.56 Ratio, For D44F/12BTRK, 8.5/8.875 in., Kit

Motive Gear Ring and Pinion, 4.56 Ratio, For D44F/12BTRK, 8.5/8.875 in., Kit

$1,058.53

Strange US Gear, Ring and Pinion, For Ford 10-bolt, 4.11, 25 Spline, 8 in. OD, Set

Strange US Gear, Ring and Pinion, For Ford 10-bolt, 4.11, 25 Spline, 8 in. OD, Set

$472.17

Strange ,Center Section, Ultra Aluminum, 40-Spl. Ltwt. Spool, Billet Pinion Support, Small Stem Pro Gear/Female Coupler

Strange ,Center Section, Ultra Aluminum, 40-Spl. Ltwt. Spool, Billet Pinion Support, Small Stem Pro Gear/Female Coupler

$5,433.14