KPM 2200 hp Fuel and PWM Package – SRT Charger / Challenger / Demon 170 – -8 Aftermarket Fuel Lines (PART #KPM-1107)

The KPM 2200 hp fuel and PWM package is designed for SRT Charger, Challenger and Demon 170 models from 2022 to 2025. It retains the OE primary fuel module and adds a KPM 800 hp secondary in-tank module, supporting up to 2200 hp at the flywheel on 98 octane fuel.

Features:

  • Retains the factory primary module and adds a direct-fit secondary module
  • Five Venturi pumps and a refill valve system scavenge fuel from both sides of the tank
  • Secondary module incorporates the fuel pick-up and sender
  • Pre-programmed PWM control operates with the factory FSCM
  • Fuel pumps compatible with petrol, ethanol and methanol at standard vehicle voltages
  • Upgradeable with the CHA-22-27-ADD kit

The pre-programmed PWM controller regulates pump current to match engine fuel demand and works with the factory Fuel System Control Module (FSCM). The primary module operates continuously, while the secondary module operates when additional fuel is required. This version requires suitable -8 aftermarket fuel lines; the supplied fuel line upgrade is for the fuel tank only.

Check the vehicle fuel system against the fitting instructions before installation, particularly around the Challenger/Charger 2021–2022 model crossover. Route the supplied high amperage wiring and have the system calibrated by your tuning professional. Maintain sufficient fuel in the tank during circuit, drag racing and full-load use.

SPECIFICATIONS

ApplicationSRT Charger / Challenger / Demon 170, 2022–2025
Power supportUp to 2200 hp at the flywheel on 98 octane fuel
Primary moduleRetained OE module
Secondary moduleKPM 800 hp in-tank fuel module
Fuel line connection-8 aftermarket fuel lines required; male -8 connection
Fuel pump compatibilityPetrol, ethanol and methanol
Fuel controlPWM controller used with the factory FSCM

 

COMPONENTS

DescriptionUnits
KPM 800 hp in-tank Fuel Module (secondary)
KPM PWM Fuel Module Controller
KPM Fuel Line Upgrade (Fuel Tank Only)
Easy fit high amperage wiring kit
Fitting and calibration instructions

More From This Category

KPM ADD-ON Fuel Kit - 2200 HP Upgrade 2006-2009 UTE / ONLY

KPM ADD-ON Fuel Kit - 2200 HP Upgrade 2006-2009 UTE / ONLY

$2,667.17

KPM ADD-ON Fuel Kit - 2200 to 2700 HP Upgrade

KPM ADD-ON Fuel Kit - 2200 to 2700 HP Upgrade

$397.15

KPM 1000hp Intank Fuel Module Package

KPM 1000hp Intank Fuel Module Package

$1,310.40

KPM ADD-ON Fuel Pump KIT to 800HP Module ( Makes 1000hp Kit)

KPM ADD-ON Fuel Pump KIT to 800HP Module ( Makes 1000hp Kit)

$602.28

KPM 1500hp Intank Fuel System Package - Includes, PWM Module

KPM 1500hp Intank Fuel System Package - Includes, PWM Module

$3,878.28