KPM 2700 hp Fuel and PWM System Package Mustang 20152017 (PART #KPM-1081)
This KPM 2700 hp Fuel and PWM System is a direct-fit package for the S550 Mustang GT (20152017), supporting up to 2700 hp at the flywheel on 98 octane fuel. It combines KPM 1500 hp primary and secondary in-tank modules with a pre-programmed PWM Fuel Module Controller.
Features:
- Petrol, ethanol and methanol compatible, including E85.
- Internal fuel pressure regulator and high-flow canister, distribution manifold and fittings.
- Operates at standard vehicle voltages without a voltage booster, external surge tank or conversion to a return-style fuel system.
- The primary module runs continuously; the secondary module switches on as power and fuel demand require.
- Maintain sufficient fuel in the tank for circuit, drag and full-load use, as advised by KPM.
- Pre-shaped ½-inch stainless steel fuel lines with EFI fittings and connectors.
- Serviceable anodised aluminium fuel filter with a cleanable 40-micron stainless steel element.
The system uses 4 Bosch Racing fuel pumps and 6 Venturi pumps with refill valves to scavenge fuel from both sides of the tank. The PWM controller adjusts pump current to match engine fuel demand and reduce heat transferred to the fuel.
For 20152017 Mustang GT models, the PWM controller operates as a standalone controller, bypassing the factory Fuel System Control Module. The supplied pressure sensor and wiring provide the fuel-pressure input used to control pump current. Installation includes mounting the controller and routing the supplied high-amperage wiring and connectors, followed by fuel-system calibration by a tuning professional.
SPECIFICATIONS | |
| Vehicle application | S550 Mustang GT (20152017) |
| Maximum supported power | 2700 hp at the flywheel on 98 octane fuel |
| Fuel pump configuration | 4 × Bosch Racing fuel pumps |
| Venturi pumps | 6 |
| Fuel compatibility | Petrol, ethanol and methanol; E85 compatible |
| Fuel control | Pre-programmed PWM Fuel Module Controller |
| Fuel line size | ½ inch |
| Fuel line material | Stainless steel |
| Fuel filter element | 40-micron cleanable stainless steel |
| Fuel filter housing | Anodised aluminium |
COMPONENTS | |
| Description | Units |
| KPM 1500 hp in-tank fuel module (primary) | |
| KPM 1500 hp in-tank fuel module (secondary) | |
| KPM PWM Fuel Module Controller | |
| KPM fuel line and KPM 2700 fuel filter upgrade | |
| Fuel pressure sensor kit | |
| Easy-fit high-amperage relay and wiring kit | |
| Fitting and calibration instructions | |


