KPM 1500 hp Fuel and PWM System Package for Commodore/HSV (2010–2017) (PART #KPM-1023)

The KPM 1500 hp fuel and PWM system is a direct replacement fuel module package for Commodore/HSV (2010–2017). Two high-performance Bosch Racing fuel pumps in an OEM-style canister support up to 1500 hp, flywheel rated on 98 octane fuel. Four Venturi pumps and a refill valve system scavenge fuel from both sides of the tank.

Features:

  • Direct replacement in-tank fuel module
  • 2 high-performance Bosch Racing fuel pumps
  • 4 Venturi pumps with refill valve system
  • Internal fuel pressure regulator
  • Pre-programmed PWM fuel pump control
  • High-flow canister, distribution manifold and fittings

The pre-programmed PWM controller adjusts electrical current to the pumps according to engine fuel demand, helping control fuel temperature during extended idling and driving.

The controller connects to the factory FSCM to read the OE signals and can use the OE fuel system programming tables. Fit the controller, route the supplied high-amperage wiring and connector kit, then have your tuning professional calibrate the fuel system.

SPECIFICATIONS

ApplicationCommodore/HSV (2010–2017)
Maximum supported power1500 hp at the flywheel on 98 octane fuel
Fuel compatibilityGasoline and ethanol, including E85
Fuel pumps2 × high-performance Bosch Racing fuel pumps
Fuel scavenging4 Venturi pumps with refill valve system
Operating voltageStandard vehicle voltage
Controller integrationUses factory FSCM signals

 

COMPONENTS

DescriptionUnits
KPM 1500 hp in-tank Fuel Module
KPM PWM Fuel Module Controller
Easy-fit high-amperage wiring and connector kit
Fitting and calibration instructions

More From This Category

KPM PWM to suit 1500 HP Fuel Module Package

KPM PWM to suit 1500 HP Fuel Module Package

$1,454.38

KPM PWM to suit 1500 HP Fuel Module Package VE- VF 2010-2017

KPM PWM to suit 1500 HP Fuel Module Package VE- VF 2010-2017

$1,461.77

KPM ADD-ON Fuel and PWM Module Kit - 2200 HP Upgrade

KPM ADD-ON Fuel and PWM Module Kit - 2200 HP Upgrade

$3,372.77

KPM Retrofit Kit for all Fuel Modules - (Wiring/Relay/Plumbing Required to Fit Into Pre 2010 Build)

KPM Retrofit Kit for all Fuel Modules - (Wiring/Relay/Plumbing Required to Fit Into Pre 2010 Build)

$338.69

KPM ADD-ON Fuel Kit - 2200 HP Upgrade

KPM ADD-ON Fuel Kit - 2200 HP Upgrade

$1,751.90