Suits: Plug 'n' Play replacement of the factory ECU for Toyota Mark II/Cresta/Chaser JZX100 1JZ-GTE VVT-I (JDM)Soarer (MY96-01) JZZ30 1JZ-GTE VVT-I (JDM)Manual transmissions only.

Includes: Elite 2500 ECU with DBW and Race Functions, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins, USB programming cable.

Notes: Installation of this Haltech product will prevent the factory TRC and ETCS systems from operating. Warning lights will illuminate on the dash cluster to indicate these systems are disabled. Removal of the TRC and ETCS warning bulbs from the dash cluster is recommended.


OVERVIEW

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
  • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
  • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
  • The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.

FEATURES

  • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
  • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. 

More From This Category

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000/1500 Nissan Silvia S14 S1 "ZENKI" Plug 'n' Play Adaptor Harness, Kit

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000/1500 Nissan Silvia S14 S1 "ZENKI" Plug 'n' Play Adaptor Harness, Kit

$699.00

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 3600mm (144"), Each

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 3600mm (144"), Each

$75.00

FAST XFI Main Harness for Rear Engine Dragster and Boats

FAST XFI Main Harness for Rear Engine Dragster and Boats

$891.16

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000-2500 Mazda RX7 FD3S-S6 Plug 'n' Play Adaptor Harness, Kit

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000-2500 Mazda RX7 FD3S-S6 Plug 'n' Play Adaptor Harness, Kit

$699.00