Nexus S2/S3 Plug 'n' Play Adapter Harness Mazda MX5 NA (PART #HT-186336)

Suits: Plug 'n' Play replacement of the factory ECU for Mazda Miata (MX-5) NA 1.6L and 1.8L with 2-plug, 2-row factory ECU. Manual transmission only.

Includes: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.

Notes: Does not support USDM OBDII 96-97, Special Edition SE and Anniversary models. All manual transmission 1.6L variants will require the factory throttle position sensor to be unplugged and removed. A full-range throttle position sensor alternative must be installed for correct functionality. Failure to do so will result in erratic behavior of the ECU at wide-open throttle along with damage to the ECU.

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug 'n' Play Adapter Kits. These adapters plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.

  • A simple Haltech Plug 'n' Play product that allows you to be up and running in just a few hours.
  • The quick start guide will walk you through installation of the Haltech Plug 'n' Play adapter into your vehicle.

Features:

  • This harness when installed in conjunction with a Haltech Nexus S3 ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
  • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.

More From This Category

Haltech ECU + Plug'n'Play Kits, Direct Plug-in ECUs, Platinum PRO Plug-in ECU Honda DC5/RSX, Kit

Haltech ECU + Plug'n'Play Kits, Direct Plug-in ECUs, Platinum PRO Plug-in ECU Honda DC5/RSX, Kit

$2,255.00

Haltech Nexus S3 Plug 'n' Play Adapter Harness Kit - Nissan Skyline R34 GT-T

Haltech Nexus S3 Plug 'n' Play Adapter Harness Kit - Nissan Skyline R34 GT-T

$3,735.00

Haltech ECU + Universal Wiring Kits, Nexus R3, Plug and Pin Set - Suits Nexus R3, Kit

Haltech ECU + Universal Wiring Kits, Nexus R3, Plug and Pin Set - Suits Nexus R3, Kit

$185.00

Haltech ECU + Plug'n'Play Kits, Elite 2500 Adaptor Harness Kits, Elite 2500 + Subaru Liberty/Legacy Gen 4 3.0R & GT Plug 'n' Play Adaptor Harness Kit

Haltech ECU + Plug'n'Play Kits, Elite 2500 Adaptor Harness Kits, Elite 2500 + Subaru Liberty/Legacy Gen 4 3.0R & GT Plug 'n' Play Adaptor Harness Kit

$3,510.00

Haltech Display Items, Elite 750 display only ECU, Each

Haltech Display Items, Elite 750 display only ECU, Each

$59.00

Haltech ECU + Universal Wiring Kits, Elite 2500, Elite 2500 ECU, Kit

Haltech ECU + Universal Wiring Kits, Elite 2500, Elite 2500 ECU, Kit

$2,795.00