Includes: Matching Delphi plug and 3 pins.

Notes: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103


OVERVIEW

Please take care when wiring this sensor as incorrect wiring will damage this sensor!All Motorsport MAP and Pressure sensors are individually electronically tested before packaging and are sold "as is" and without any further warranty.Returns of opened sensors are not accepted. If you do not accept these terms and conditions please return the unopened sensor in its original packaging for a full refund.

More From This Category

Haltech Inputs and CAN Expansion, Map Sensors, 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT, Kit

Haltech Inputs and CAN Expansion, Map Sensors, 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT, Kit

$289.00

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Open Tip Thermocouple Length: 2.32m (91.5"), Kit

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Open Tip Thermocouple Length: 2.32m (91.5"), Kit

$129.00

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Open Tip Thermocouple Length: 0.61m (24"), Kit

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Open Tip Thermocouple Length: 0.61m (24"), Kit

$129.00

FAST XFI Wide-Band Auxiliary Air/Fuel Ratio Module Kit

FAST XFI Wide-Band Auxiliary Air/Fuel Ratio Module Kit

$556.12

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Nut and Brass Ferrule Only, Each

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Nut and Brass Ferrule Only, Each

$15.00