Adapter - Nylon - In Line, 38mm (2 x 1/4" NPT) & Bung (Part #0416)

Two 1/4" NPT holes allow the fitment of a sensor and or air bleed. Should you only need one hole, a bung is included.

This simple Adapter allows easy fitting directly into the top radiator hose.

Suits all temperature sensors with either a 5mm or a 6mm outside diameter and temperature gauge senders with ¼” NPT thread.

Note: This is an accessory for use with Part #0401, #0404, #0444, and #0500 Thermatic® Switches.

The adapter ends for hose fitting are 38mm in size.

  • With the use of our 3mm adapter sleeve, this can be increased to 44mm (Part #18510)
  • With the use of our 6mm adapter sleeve, this can be increased to 51mm (Part #18511)

More From This Category

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 9.100 in. Long, .080 in. Wall, 3/8 in. Diameter, Each

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 9.100 in. Long, .080 in. Wall, 3/8 in. Diameter, Each

$21.28

RaceTec Pistons, AutoTec, SBC 23deg 4.125, Dome, 0.03 Oversize, 4.155 Bore, 3.875 Stroke, 1.060 Comp

RaceTec Pistons, AutoTec, SBC 23deg 4.125, Dome, 0.03 Oversize, 4.155 Bore, 3.875 Stroke, 1.060 Comp

$1,313.54

Wilwood Caliper, AERO6, Radial, 1.25 in. Rotor Width, 15.00 in. Rotor Dia, 1.75/1.38/1.38 in. Bore, LH, Alum, Ano, Each

Wilwood Caliper, AERO6, Radial, 1.25 in. Rotor Width, 15.00 in. Rotor Dia, 1.75/1.38/1.38 in. Bore, LH, Alum, Ano, Each

$913.06

MILODON Cylinder Head Studs, 12-point, 8740 Chromoly, Black Oxide, Washers, For Ford, 351W, Kit

MILODON Cylinder Head Studs, 12-point, 8740 Chromoly, Black Oxide, Washers, For Ford, 351W, Kit

$435.75

Motive Gear Carrier And Pinion Shim Kit, AMC 20, Kit

Motive Gear Carrier And Pinion Shim Kit, AMC 20, Kit

$68.71

KIT CONTENTS
Description Quantity
Adapter - Nylon - In Line, 38mm (2 x 1/4" NPT Holes) 1
Bung 1