Chev Small Block STROKER Roller Custom (PART #CROW-1950STROKER)

IMPORTANT NOTE
Customer must advise if the engine is stroker and/or if it is a Vortec (Thrust plate style) engine. These applications may warrant a custom ground camshaft and must be discussed with our technical department prior to manufacturing.
Early style SBC cams can be used in a thrust plate block as long as a cam button set up is made to control the thrust loads.

Please see further notes below relating to custom camshafts

Please fill in our Cam Recommendation Form and we will get back to you with a suitable grind as soon as possible
If you have already received a Recommendation or you have particular specs you want to match, please email us with the details

Please be aware:
- These cams will be ground to order so please allow at least 2 weeks lead time.
- Upfront payment of the camshaft is required before any custom jobs are produced

More From This Category

MANLEY Rotating Assembly, 4.250 in. Stroke, 4.560 in. Bore Size, 6.385 in. Rod Length, +43cc Dome, BBC 555, Kit

MANLEY Rotating Assembly, 4.250 in. Stroke, 4.560 in. Bore Size, 6.385 in. Rod Length, +43cc Dome, BBC 555, Kit

$6,982.47

KB Piston, 4 in. Bore, For Ford 351W, Rod 5.956, Flat Top +6.5cc 2V, .020 Oversized, w/ Rings, Each

KB Piston, 4 in. Bore, For Ford 351W, Rod 5.956, Flat Top +6.5cc 2V, .020 Oversized, w/ Rings, Each

$1,109.28

MANLEY Pushrod, Ball End, 4130 Chromoly, 5/16 in. Dia, 8.408 in. Length, .080 in. Wall, For Ford 351C, Set of 16

MANLEY Pushrod, Ball End, 4130 Chromoly, 5/16 in. Dia, 8.408 in. Length, .080 in. Wall, For Ford 351C, Set of 16

$211.59

Nitto Conrods for Mitsubishi 4G63 Vr4 Galant H-Beam 150.0mm

Nitto Conrods for Mitsubishi 4G63 Vr4 Galant H-Beam 150.0mm

$815.00