9.850" x 3/8" Chrome Moly Push Rods (PART #CROW-PR8985-138)

Chrome Moly Heavy Wall Push Rod
Sold individually

Diameter: 3/8"

Wall thickness: .138"

210deg radius ball end

Note: these do not fit into our guide plates

Our pushrods are manufactured from 4130 seamless chrome moly. Centerless ground and fully turned 210deg radius ends. Hardened and carburized tube with greater than 58 RC hardness and held to .005" maximum runout. Up to 40% greater column strength for superior durability and increased stiffness to virtually eliminate compression and deflection. Black oxide coated gloss black finish.

More From This Category

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 8.400 in. Length, .080 in. Wall, Set of 8

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 8.400 in. Length, .080 in. Wall, Set of 8

$233.48

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 10.200 in. Length, .135 in. Wall, Set of 8

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 10.200 in. Length, .135 in. Wall, Set of 8

$320.71

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 8.500 in. Length, .135 in. Wall, Set of 8

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 8.500 in. Length, .135 in. Wall, Set of 8

$320.71

Proflow Chrome Moly Pushrods 7.850" x 3/8", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Set

Proflow Chrome Moly Pushrods 7.850" x 3/8", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Set

$239.00

Proflow Chrome Moly Pushrods 9.100" x 3/8", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

Proflow Chrome Moly Pushrods 9.100" x 3/8", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

$20.00

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.300 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.300 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$344.25