9.700" x 3/8" Chrome Moly Push Rods (PART #CROW-PR8970-138)

Chrome Moly Heavy Wall Push Rod
Sold individually

Diameter: 3/8"

Wall thickness: .138"

210deg radius ball end

Note: these do not fit into our guide plates

Our pushrods are manufactured from 4130 seamless chrome moly. Centerless ground and fully turned 210deg radius ends. Hardened and carburized tube with greater than 58 RC hardness and held to .005" maximum runout. Up to 40% greater column strength for superior durability and increased stiffness to virtually eliminate compression and deflection. Black oxide coated gloss black finish.

More From This Category

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 8.525 in. Length, .080 in. Wall, Set of 8

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 8.525 in. Length, .080 in. Wall, Set of 8

$233.48

COMP Cams Pushrods, Hi-Tech, Chromoly, Heat-Treated, 3/8 in. Diameter, 8.280/9.250 in. Length, Universal, Set of 16

COMP Cams Pushrods, Hi-Tech, Chromoly, Heat-Treated, 3/8 in. Diameter, 8.280/9.250 in. Length, Universal, Set of 16

$459.30

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 9.650 in. Length, .080 in. Wall, Each

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 9.650 in. Length, .080 in. Wall, Each

$29.18

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 10.950 in. Length, .080 in. Wall, Set of 8

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 10.950 in. Length, .080 in. Wall, Set of 8

$233.48

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 8.280 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 8.280 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$344.82

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.250 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.250 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$344.20