To suit Holden V8 253-308 and 304/355 VN Heads

Important Lifter Preparation Notes:Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

Crow Cams Camshaft, Holden V8 304/355 Carby Solid Roller, Adv. Duration 295/298, Valve Lift 0.660/0.677

Crow Cams Camshaft, Holden V8 304/355 Carby Solid Roller, Adv. Duration 295/298, Valve Lift 0.660/0.677

$947.30

CROWCAMS Powerbond Harmonic Balancer, Pulley, LSA 28% Overdrive Supercharger

CROWCAMS Powerbond Harmonic Balancer, Pulley, LSA 28% Overdrive Supercharger

$602.12

Crow Cams FORD BA/FG 6 CYL TURBO INLET

Crow Cams FORD BA/FG 6 CYL TURBO INLET

$667.01

Crow Cams FORD HYD.LIFTER 6 CYL SET

Crow Cams FORD HYD.LIFTER 6 CYL SET

$214.87

Crow Cams Pushrod, 9.500 Length, 5/16in. Diameter, .110 Thick, 210 Radius, Each

Crow Cams Pushrod, 9.500 Length, 5/16in. Diameter, .110 Thick, 210 Radius, Each

$18.09