To suit Holden V8 253-308 and 304/355 VN Heads

Important Lifter Preparation Notes:Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

Crow Cams Camshaft, Ford Cleveland V8 Hydraulic Roller, Adv. Duration 276/283, Valve Lift 0.568/0.578

Crow Cams Camshaft, Ford Cleveland V8 Hydraulic Roller, Adv. Duration 276/283, Valve Lift 0.568/0.578

$929.30

Crow Cams Camshaft, LS Cam, Adv. Duration 292/296, Valve Lift 0.593/0.610

Crow Cams Camshaft, LS Cam, Adv. Duration 292/296, Valve Lift 0.593/0.610

$558.81

Crow Cams SPRING SEAT 1.270" 0.68" BOSS

Crow Cams SPRING SEAT 1.270" 0.68" BOSS

$13.57

Crow Cams Pushrod, 8.721? 5/16" Hardened, Set of 16

Crow Cams Pushrod, 8.721? 5/16" Hardened, Set of 16

$139.70

Crow Cams ECOTEC PERF SPRINGS

Crow Cams ECOTEC PERF SPRINGS

$1,829.20