Ford Windsor Custom Roller Cam - 55mm (PART #CROW-62950-55)

IMPORTANT NOTE
When converting early Windsor blocks to roller applications using standard style factory drop in roller lifters (5300H), you will require a camshaft with a smaller base circle.
This allows for the lifters to remain low enough in the bore to not expose the oil band in the body of the lifter at full lift.

If using Tie bar style lifters (5351H) a standard base circle cam is suitable.

These cams will be ground to order so please allow at least 2 weeks lead time.

Please see further notes below relating to custom camshafts

Please fill in our Cam Recommendation Form and we will get back to you with a suitable grind as soon as possible. If you have already received a recommendation or have a particular spec you'd like to use, please email us with the details.

Please be aware:
- These cams will be ground to order so please allow at least 2 weeks lead time.
- Upfront payment of the camshaft is required before any custom jobs are produced

More From This Category

COMP Cams Camshaft, Xtreme Energy, Hydraulic Flat Cam, Advertised Duration 284/296, Lift .541/.544, For Ford 221-302, Each

COMP Cams Camshaft, Xtreme Energy, Hydraulic Flat Cam, Advertised Duration 284/296, Lift .541/.544, For Ford 221-302, Each

$602.88

Crow Cams Camshaft, Ford Windsor EB-AUII Hydraulic Roller, Adv. Duration 309/296, Valve Lift 0.539/0.539

Crow Cams Camshaft, Ford Windsor EB-AUII Hydraulic Roller, Adv. Duration 309/296, Valve Lift 0.539/0.539

$929.30

Crow Cams Camshaft, Ford Windsor EB-AUII Hydraulic Roller, Adv. Duration 275/275, Valve Lift 0.447/0.447

Crow Cams Camshaft, Ford Windsor EB-AUII Hydraulic Roller, Adv. Duration 275/275, Valve Lift 0.447/0.447

$929.30