Important Lifter Preparation Notes:
Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

Crow Cams Pushrod, 6.900”  5/16" Super Duty

Crow Cams Pushrod, 6.900” 5/16" Super Duty

$14.50

View
Crow Cams Pushrod, 8.850 Length, 3/18in. Diameter, .138 Thick, 210 Radius, Set of 6

Crow Cams Pushrod, 8.850 Length, 3/18in. Diameter, .138 Thick, 210 Radius, Set of 6

$19.40

View
Crow Cams Pushrod, 9.400 Length, 3/18in. Diameter, .138 Thick, 210 Radius, Set of 6

Crow Cams Pushrod, 9.400 Length, 3/18in. Diameter, .138 Thick, 210 Radius, Set of 6

$19.40

View
CROWCAMS Timing Chain Set, Performance, For Ford Falcon V8 EB on EFI engines and 351 Windsor, Double

CROWCAMS Timing Chain Set, Performance, For Ford Falcon V8 EB on EFI engines and 351 Windsor, Double

$144.08

View
Crow Cams Pushrod, 8.200 Length, 5/16in. Diameter, .110 Thick, 210 Radius, Set of 6

Crow Cams Pushrod, 8.200 Length, 5/16in. Diameter, .110 Thick, 210 Radius, Set of 6

$15.15

View
CROWCAMS Rear Main Seal, LS1 to 2004, LS2, LS3/L100, L76/L77, LSA

CROWCAMS Rear Main Seal, LS1 to 2004, LS2, LS3/L100, L76/L77, LSA

$49.06

View