Important Lifter Preparation Notes:
Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

Crow Cams LS CAM & VTKLS8 SPRING KIT

Crow Cams LS CAM & VTKLS8 SPRING KIT

$1,111.77

View
Crow Cams 8 CYL. DOUBLE RACE SPRING

Crow Cams 8 CYL. DOUBLE RACE SPRING

$199.84

View
Crow Cams Ford Fe Roller Custom Cam

Crow Cams Ford Fe Roller Custom Cam

$851.30

View
Crow Cams Camshaft, Ford Windsor 351 Flat Tappet Custom

Crow Cams Camshaft, Ford Windsor 351 Flat Tappet Custom

$380.95

View
Crow Cams DOUBLE V8 RACE SPRING

Crow Cams DOUBLE V8 RACE SPRING

$245.62

View
Crow Cams Pushrod, 8.400” 5/16" Super Duty, Set of 16

Crow Cams Pushrod, 8.400” 5/16" Super Duty, Set of 16

$196.41

View