BluePrint Engines 427 c.i. GM Compatible Builder Series - Standard Edition - Fuel Injected - 700R4 Automatic Transmission - Polished Pulley Kit. (PART #BPE-B427FK700)

This BluePrint Engines package delivers serious power without overcomplicating things, making it a great choice for anyone looking for a strong, reliable upgrade. The included Holley Sniper 2 EFI system helps provide smooth starts, easy drivability, and modern fuel control, while the polished front accessory drive gives it a clean, finished look. Paired with a fully assembled 700R4 automatic transmission, this setup is designed to get you on the road faster with fewer headaches. From the fuel system to the accessories, it’s a complete, ready-to-run solution that combines power, convenience, and reliability in one package.

Blocks:

• BluePrint Engines High Strength Cast Iron Block
• Manufactured and Machined in the USA!
• Drilled and Tapped for Clutch Linkage
• Mech Fuel Pump Provision: Yes
• Passenger Side Dipstick
• 1-Piece Rear Main Seal
• 4-Bolt Main
• 4.125" Bore

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads - HP8103
• 66cc Chamber
• 2.08" Intake / 1.60" Exhaust Valves
• 220cc Intake / 67cc Exhaust Runners

Rotating Assembly:

• Forged 6.000" Connecting Rods
• Internally Balanced Front and Rear

Included items:

• Pro Series Ready Run Distributor - BPP3503BK
• Thermostat and Thermostat Housing
• Holley Sniper 2 EFI System - BPP550-510-3XX
• EFI Fuel Pump Kit - BPP5267
• BluePrint Valve Covers - BPP9518
• Spark Plugs and Wires
• Timing Cover
• Oil Pan
  • Polished Front Accessory Drive - BPP350FDACPS4 Reverse Rotation Short Water Pump
  • Type II Power Steering Pump
  • Remote Power Steering Pump Reservoir
  • 140amp 1-wire Alternator
  • 7B10 Peanut Style Air Conditioning Compressor

Assembled with Complete 700R4 Automatic Transmission Package:

• 700R4 Complete Package
• 2200-2400 Stall Torque Converter
• Flex Plate
• Starter

Notes:

• BPE recommends electric fans that produce 3000 cfm or more, for engines that are 400cid or less. Engines that are over 400cid BPE recommends 4000cfm or more.
• The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
• Not for use in pollution-controlled vehicles.
• Due to numerous tire/rear gear combinations, this transmission does NOT ship with a speedometer gear, or sender housing.
• The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.