BluePrint Engines 400 c.i. GM Compatible Builder Series - Standard Edition - Carbureted - 700R4 Automatic Transmission - Polished Pulley Kit. (PART #BPE-B400K700)

BluePrint Engines’ GM Small Block Compatible 400 c.i. As part of the Standard Edition Builder Series, this turnkey package features a polished pulley kit and premium components, blending reliability, power, and show-ready style. Designed for enthusiasts who want instant throttle response, effortless drivability, and traditional small-block appeal, this engine and transmission combo brings high-performance excitement to any build, ready to fire up and hit the road with confidence.

Blocks:

  • BluePrint Engines High Strength Cast Iron Block
  • Drilled and Tapped for Clutch Linkage
  • Mech Fuel Pump Provision: Yes
  • Passenger Side Dipstick
  • 1-Piece Rear Main Seal
  • 4-Bolt Main
  • 4.125" Bore

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP8103
  • 64cc Chamber
  • 2.08" Intake / 1.60" Exhaust Valves
  • 220cc Intake / 67cc Exhaust Runners

Rotating Assembly:

  • Forged I Beam 5.700" Connecting Rods w/ 150,000 PSI Bolts
  • Internally Balanced Front - Externally Balanced Rear

Included items:

  • Holley 750cfm Classic Carburetor - BPP080508S
  • Pro Series Ready Run Distributor - BPP3503BK
  • Thermostat Housing - BPP10108470
  • Mechanical Fuel Pump - BPP61073
  • Thermostat - BPP180TS
  • Spark Plugs - BPP793
  • Plug Wire Separators
  • Spark Plug Wires
  • Valve Covers
  • Timing Cover
  • Oil Filter
  • Oil Pan
  • Polished Front Accessory Drive - BPP350FDACPS4
    • Reverse Rotation Short Water Pump
    • Type II Power Steering Pump
    • Remote Power Steering Pump Reservoir
    • 140amp 1-wire Alternator
    • 7B10 Peanut Style Air Conditioning Compressor

Assembled with Complete 700r4 Automatic Transmission Package:

  • 700R4 Complete Package
  • 2200-2400 Stall Torque Converter
  • Flex Plate
  • Starter

Notes:

  • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
  • Due to numerous tire/rear gear combinations, this transmission does NOT ship with a speedometer gear, or sender housing.
  • Package Ships assembled as pictured.
  • The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.

SPECIFICATIONS

Horsepower & Torque500 Horsepower / 510 ft. lbs. Torque
Cylinder HeadsBluePrint Engines Aluminum Cylinder Heads
Compression Ratio10.3:1
CamshaftHydraulic Roller Cam - .553 Intake / .576 Exhaust and 236 Intake / 242 Exhaust Duration @.050–110 LSA
PistonsForged - Dish - 16cc
CrankshaftForged Crank - 3.750" Stroke and OEM Type I-Beam 5.700" Rods
Fuel Recommendation91+ Octane
Ignition TimingInitial Timing 10-16 - Total Timing 32-34
Firing Order1,8,4,3,6,5,7,2
Stall Converter2400+ RPM
Intake ManifoldIntake Manifold Dual Plane Satin Aluminum - BPP350VINT
Spark PlugBPP7938 NGK 7938 BKR5E
Harmonic BalancerBPP350
Flexplate/FlywheelBPP871006
Recommended Service OilBPP10W30
Recommended Oil FilterBPP51061
Total Oil Capacity with Production Oil Pan, and Correct Filter5 Quarts