APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!

Features:
APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!

More From This Category

DBA Front 5000 Series XS Brake Rotor, 296mm, For Holden VT-VZ, Kit

DBA Front 5000 Series XS Brake Rotor, 296mm, For Holden VT-VZ, Kit

$917.70

Strange ,Dual rear brake kit /fits H1136 /hard pads

Strange ,Dual rear brake kit /fits H1136 /hard pads

$2,878.09

DBA Rear 4000 Series XS Gold Brake Rotor, 300mm, For Nissan Skyline R32/33/34 Twin Turbo, Kit

DBA Rear 4000 Series XS Gold Brake Rotor, 300mm, For Nissan Skyline R32/33/34 Twin Turbo, Kit

$335.40

DBA Front Street Series En-Shield Brake Rotor, 231mm, For Suzuki Ignis MF 1.2L 11/16, Kit

DBA Front Street Series En-Shield Brake Rotor, 231mm, For Suzuki Ignis MF 1.2L 11/16, Kit

$97.90

DBA Rear 4000 Series XS Gold Brake Rotor, 315mm, For Nissan Patrol GQ/GU Y61 92, Kit

DBA Rear 4000 Series XS Gold Brake Rotor, 315mm, For Nissan Patrol GQ/GU Y61 92, Kit

$361.20

Wilwood Rotor, 1.25 Width, 15 in. Dia, 12 x 8.80L in. Bolt Circle, Spec-37 Iron, 72 CV, SRP Drilled & Slotted, Black Electro Coat, L/H, Each

Wilwood Rotor, 1.25 Width, 15 in. Dia, 12 x 8.80L in. Bolt Circle, Spec-37 Iron, 72 CV, SRP Drilled & Slotted, Black Electro Coat, L/H, Each

$1,188.56