APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!

Features:
APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!

More From This Category

Wilwood KIT,REAR,EPB,FDP-LP,BIG FORD,2.36 OFFSET 1PC,11.00 ROTOR

Wilwood KIT,REAR,EPB,FDP-LP,BIG FORD,2.36 OFFSET 1PC,11.00 ROTOR

$3,705.10

DBA Street Series Master Cylinder, For Toyota, Kit

DBA Street Series Master Cylinder, For Toyota, Kit

$257.20

Strange ,Fitting, Master Cylinder, -3 AN Male Threads x 9/16-20 in. Male Threads, Stainless Steel, Natural, Each

Strange ,Fitting, Master Cylinder, -3 AN Male Threads x 9/16-20 in. Male Threads, Stainless Steel, Natural, Each

$22.59

Wilwood Bolt, 12 Point, Stainless, 18-8, 12 Point, 0.750 in. Length, 1/4-28 Thread, Kit

Wilwood Bolt, 12 Point, Stainless, 18-8, 12 Point, 0.750 in. Length, 1/4-28 Thread, Kit

$30.55

Strange ,Caliper bracket from B1700WC brake kit- ea

Strange ,Caliper bracket from B1700WC brake kit- ea

$119.85

DBA Front 4000 Series T3 Brake Rotor, 354mm, For Toyota Tundra 05-08 / Cruiser VDJ200 MY16, Kit

DBA Front 4000 Series T3 Brake Rotor, 354mm, For Toyota Tundra 05-08 / Cruiser VDJ200 MY16, Kit

$350.70