APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!

Features:
APR Braided Stainless Steel Direct-Fit Brake Line Upgrades are a direct replacement that improves your braking experience with the best lines on the market today. We do away with the factory rubber hoses that expand and can even rupture over time, and replace them with braided 304 stainless steel lines with a smooth-bore Polytetrafluoroethylene (PTFE) / Teflon core that allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, ours are application specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive polyvinyl chloride (PVC) outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft @ 1,000 psi and 0.11 cc/ft at 2,900 psi! They are compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. These are the only brake lines you'll ever need!

More From This Category

DBA Rear Street Performance Brake Pads, For Mitsubishi Challenger 1998-2016, Pajero Sport 2015-On, Kit

DBA Rear Street Performance Brake Pads, For Mitsubishi Challenger 1998-2016, Pajero Sport 2015-On, Kit

$150.90

DBA Front 5000 Series HD Brake Ring, 390mm, For Dodge Charger Brembo Replacement 15 With M6 Lock Nut, Kit

DBA Front 5000 Series HD Brake Ring, 390mm, For Dodge Charger Brembo Replacement 15 With M6 Lock Nut, Kit

$662.50

DBA Front Street Series T2 Brake Rotor, 312mm, For BMW 3series E90/91/92/93/F31 & XI S&X Drive E84, Kit

DBA Front Street Series T2 Brake Rotor, 312mm, For BMW 3series E90/91/92/93/F31 & XI S&X Drive E84, Kit

$209.30

DBA Front Street Series Brake Pads, For Nissan & Subaru 1989-2004, Kit

DBA Front Street Series Brake Pads, For Nissan & Subaru 1989-2004, Kit

$66.10

DBA Street Series Brake Hose, For Mazda, Kit

DBA Street Series Brake Hose, For Mazda, Kit

$56.40

DBA Rear Street Series En-Shield Brake Rotor, 299.9mm, For BMW E82/E88 COUPE & CONVERTIBLE 10/07-10/13, Kit

DBA Rear Street Series En-Shield Brake Rotor, 299.9mm, For BMW E82/E88 COUPE & CONVERTIBLE 10/07-10/13, Kit

$126.60