Our universal cable driven throttle bodies are designed with a range of inlet diameters to suit varying intake sizes to provide your vehicle with that power gain it’s looking for. They use sealed bearings on stainless steel throttle shafts in order to prevent any unwanted boost leaks. Also incorporated are two AN6 o-ring ports which can be used to plumb our idle motor control block together with an IAC motor.

  • Suits a standard GM LS throttle position sensor.
  • Corresponding weld plates are also available, allowing them to be mounted to any aftermarket intake.
  • Sealing gaskets also available
Proflow Throttle Body, Universal 80mm Bore Size, MPI, Billet Aluminium, Black Anodised Diagram Image

More From This Category

Proflow Chrome Moly Pushrods 7.350" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

Proflow Chrome Moly Pushrods 7.350" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

$20.00

Proflow Steering Shaft, Stainless Steel, 3/4 in. DD, 18 in. Length, Each

Proflow Steering Shaft, Stainless Steel, 3/4 in. DD, 18 in. Length, Each

$93.45

Proflow Steel Chassis Jam Nut L-H 7/16-20' 11/16' Hex

Proflow Steel Chassis Jam Nut L-H 7/16-20' 11/16' Hex

$1.76

Proflow Chrome Moly Pushrods 9.250" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

Proflow Chrome Moly Pushrods 9.250" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

$20.00