5/8″-18 x 3″ Grade 8 Fully Threaded Bolts
– Threads are rolled for maximum strength
– Thin .200″ hex head provides additional clearance
– Length is measured from underneath the head of the stud
– 7/8″ wrench size

.0625″ Hardened Washers
– Prevents galling
– Ensures hex remains true to backside of axle flange

.687″ OD x .875″ Stud Sleeves
– Provides proper diameter & surface to pilot wheel
– Internal 5/8″-18 threads to secure stud and prevent movement
– Notched for installation

Sleeve Installation Wrench
– Fits notch on sleeve to simplify installation

.250″ Wide Aluminum Washers
– Reduces marring on wheel face from flanged lug nut
– Keeps lug nut from bottoming-out on stud sleeve *

5/8″-18 Flanged Lug Nuts
– Provides secure clamping force
– 15/16″ wrench size

* Rotor hat & wheel thickness will determine proper washer width
– Sleeve length should exceed combination but not beyond washer
– Additional sleeves are available- A1027C

More From This Category

Strange ,5/8" stripper washer (.0625")- ea

Strange ,5/8" stripper washer (.0625")- ea

$0.66

Strange ,Wheel Stud, Screw-In, 5/8-18 in. RH, 4.000 in. Length, 0.688 in. Washers, Nuts, Set of 10

Strange ,Wheel Stud, Screw-In, 5/8-18 in. RH, 4.000 in. Length, 0.688 in. Washers, Nuts, Set of 10

$216.96

Strange ,Wheel Studs, Axle Studs, Screw-in, 1/2-20 in. RH Thread, 2.500 in. Underhead Length, Grade 8 Fully Threaded Bolts, Rolled Threads, Set of 10

Strange ,Wheel Studs, Axle Studs, Screw-in, 1/2-20 in. RH Thread, 2.500 in. Underhead Length, Grade 8 Fully Threaded Bolts, Rolled Threads, Set of 10

$64.60

Strange ,Axle Studs, Screw-In, 5/8 in.-18 RH, 3.50 in. Length, Lug Nuts, .250 in. Aluminum Washers, Kit

Strange ,Axle Studs, Screw-In, 5/8 in.-18 RH, 3.50 in. Length, Lug Nuts, .250 in. Aluminum Washers, Kit

$216.96

Strange ,Axle Stud, Screw-In, 1/2 in. x 20 RH Thread, 3.00 in. Length, Each

Strange ,Axle Stud, Screw-In, 1/2 in. x 20 RH Thread, 3.00 in. Length, Each

$6.46